C-Arm 6kW with FPD DOXA SERIES DR PLUS

Specifications

The C-Arm 6 with FPD DOXA Series DR Plus machine is manufactured and exported by us across West Bengal at cost-effective prices. You can use our C-Arm machines in your multispeciality hospitals and healthcare centers. This C-Arm machine comes with a generator capacity of 3.5 KW with a consumption of 220 volts of voltage. Our C-Arm machine is available in a highly compact and ergonomic design with intuitive positioning which assures its functionality at a greater level. It works on a frequency of 50 Hz. Our machine provides superb image quality on the LED Monitor attached to the machine. It is fixed with a USB memory stick which helps in keeping the backup of the images captured. You can permanently store about 100 images in our FPD DOXA machine. 

High-Frequency C-Arm machine diagnostic equipment for general-purpose fluoroscopy, it is designed for Orthopaedics, Neurology, Cardiology, Gastroenterology MAKE: X-TECH MEDICAL SYSTEMS Pvt. Ltd. (AERB, BIS, Compliance with FDA & CE & IEC60601-2-52-2009, ISO 9001:2015, ISO 13485:2016, ISO 14001:2015, ISO 10002:2014, ISO 45001:2018 APPROVED).

OUTPUT

SENSOR

ELECTRONICS

MECHANICAL

COMMUNICATION

IMAGE PERFORMANCE

ENVIRONMENTAL

POWER

CONTROL PANEL

LCD DISPLAY: Very compact, soft touch contact panel with 20x3(Columns x Rows) LCD on which kV, mAs, fluoro mA, and various errors (example:- kV error, filament error & thermal error are displayed on LCD screen for self-diagnosis. 

Control Panel Has Following Functions And Indications:-

1. On/Off Switch
2. C-Arm up/down switch on both sides
3. kV/mAs increase and decrease switch
4. Fluoro timer reset switch(for re-initiate the exposure after 300 sec fluoro timer)
5. ABS selection switch for hands-free operation also known as ADR.
6. X-Ray on switch with indicator
7. Collimator control switch
8. Radio fluoro change over switch and APR switch
9. II Field selection switch(for non-DR)

PATIENT ADMINISTRATION

1. Add New Patient
2. Modify Patient Details
3. Delete or search patient data
4. Add/Modify Doctor Information
5. Add procedure information

IMAGE ACQUISITION

1. Acquisition at 1024x1024@16 bits per pixel @15 FPS
2. Transfer to Reference Monitor

OPERATING MODES:- Normal Fluoro; Snapshot(Single image for better image quality)

LIVE IMAGE PROCESSING

1. Frame Average up to 32 Frames
2. Brightness & Contrast Adjustment 
3. Image Rotation (1 degree)
4. Image Flip/Mirror
5. Image Invert
6. Last Image Hold
7. Boosting Time Less Than 50 seconds

IMAGE STORAGE

1. Storage at full resolution of 1024x1024@16 bits per pixel
2. 2,00,000 images at full resolution 3.1000 runs of 200 frames

IMAGE POST-PROCESSING

1. Previous/Next Frame Viewing
2. Previous/Next Run Viewing
3. Image Invert
4. Zoom in/zoom out
5. Brightness & contrast adjustment
6. Annotations & Measurements
7. Image Rotation(1 degree)
8. Image Flip/Mirror 
9. Frame by Frame Viewing of Run

ON SCREEN DISPLAY

1. Shows Key Patient Information on Screen
2. Shows Hospital Name on Screen
3. 3840x2160 UHD

REMOTE CONTROL: Most used functions can be controlled via Remote Control

UNIQUE FEATURES-ARTIFICIAL INTELLIGENCE ENABLED

1. Optimal Dose Indicator algorithm(ODI) for easy information to doctor/technician to get optimal image quality
2. This is useful even when used in Manual X-Ray mode. No need to adjust the X-ray continuously. The indicator tells the user when the optimal dose is reached
3. Al & Deep Learning

EXPORT MEDIA

1. Export of Runs to USB. AVI plays on all laptops including i-MAC/i-Pads
2. Export of AVI can be configured to hide patient data to protect the privacy of patients

MONITOR: 27 inches

C-Arm Movement

• Rotation> 180 degree
• Motorized Up/down: 420mm 
• Horizontal Travel:200mm 
• Arc Orbital Movement: 120 degree
• Wig Wag=12.5 Degrees
• Source to image distance-940mm

Maximum output: 6 kW

Maximum mA output: 18mA in fluoro/30mA boost/100mA in radio

KV control: 40- 120 kV

Power input: 220V AC, 50 HZ, 16A

Digital Display: mA, S & kV

Fault Finding: Self Diagnostics

Overload Protection: Simultaneous Protection from the input voltage.

Voltage compensation: AUTOMATIC

Large FOV: The 560RF has an active region of 23.6x23.6cm (9.3x9.3in), a larger field of view that dramatically increases imaging area capacity.

Versatile Design: Compact, slender panels provide more free space for C-Arm modalities. Lightweight and convenient for diverse applications.

Advanced Technology: Direct-Deposit Csl combined with a precise balance of engineering factors. Panels developed for highly detailed, low-dose diagnostic imaging.

TIALIC: More efficient workflow with CareRay’s patented TIALIC (Time-Independent Adaptive Low-Dose Image Correction) technology. Avoid low signal-to-noise Ratios caused by insufficient high-voltage power.